Just a color touch screen will guide you through any of its functions. Either printing or maintenance
For any question contact us!
Formlabs Fuse 1
Formlabs Fuse 1 – High Performance SLS finally within reach
Available Materials
NYLON 11 (METRIC)
Ultimate Tensile Strength
49 MPa
Tensile Modulus
1573 MPa
Elongation at Break (X/Y)
40 %
Notched IZOD
71 J/m
Refresh Rate
50 %
NYLON 12 (METRIC)
Ultimate Tensile Strength
50 MPa
Tensile Modulus
1850 MPa
Elongation at Break (X/Y)
11 %
Notched IZOD
32 J/m
Refresh Rate
30 %
Specifications
Printer
Technology
Selective Laser Sintering
Maximum Part Size (Nylon 12 Powder)
15.9 × 15.9 × 29.5 cm
6.3 × 6.3 × 11.6 in
Layer Thickness
110 microns
0.004 in
Laser Type
Ytterbium Fiber 10W
Laser Spot Size (FWHM)
200 microns
0.0079 in
Material Refresh Rate
30% – 50%
Build Chamber
Modular, compatible with Fuse 1 and Fuse Sift
Technology
Selective Laser Sintering
Maximum Part Size (Nylon 12 Powder)
15.9 × 15.9 × 29.5 cm
6.3 × 6.3 × 11.6 in
Build Volume (W × D × H)
16.5 x 16.5 x 30 cm
6.5 x 6.5 x 11.8 in
Layer Thickness (Axis Resolution)
110 microns
0.004 in
Hopper Capacity
8.5 kg Nylon 12
18.7 lb Nylon 12
Material Refresh Rate
30% – 50%
Dimensions
68.5 x 64.5 x 106.5 cm
27 x 25.4 x 41.9 in
Supports
No supports
Minimum Access Dimensions (W × D × H)
125.5 × 149.5 × 187 cm
49.4 × 59.0 × 73.6 in
Printer Dimensions (W × D × H)
64.5 × 68.5 × 107 cm (165.5 cm with stand)
25.4 × 27 × 42 in (65.0 in with stand)
Recommended Operating Footprint (W × D × H)
145.5 × 149.5 × 167.5 cm (49.4 × 59 × 66 in) to allow access to the front and sides of the printer.
Stand Dimensions (W × D × H)
59.6 x 60 x 58.4 cm
23.5 × 23.6 × 23 in
Weight
114 kg (without build chamber or powder)
251.3 lb (without build chamber or powder)
Startup Time
60 minutes
Operating Environment
18 – 28 ºC
68 – 82 ºF
Internal Temperature
Up to 200 ºC
Up to 392 ºF
Temperature Control
Quartz tube heating elements
Positive temperature coefficient (PTC) cartridges
Air Handling
Pressure-controlled two-stage filtration
(Replaceable HEPA and carbon mediums)
Power Requirements
EU: 230 VAC, 7.5 A (dedicated circuit)
US: 120 VAC, 15 A (dedicated circuit)
Galvanometers
Formlabs Custom
Laser Specifications
Ytterbium Fiber, rated to > 10,000 hrs
EN 60825-1: 2014 certified
Class 1 Laser Product
1065 nm wavelength
Maximum 10 Watts
4.01 mrad beam divergence (nominal, full angle)
Laser Spot Size (FWHM)
200 microns
.008 in
Radiation Information
The Fuse 1 is a Class 1 Laser product. Accessible radiation is within Class 1 limits.
Connectivity
Wi-Fi (2.4 GHz)
Ethernet (1000 Mbit)
USB 2.0
Printer Control
10.1” interactive touchscreen
1280 × 800 resolution
Alerts
Touchscreen alerts and tracking
SMS/email via Dashboard
Live video feed with computer vision
Proactive maintenance alerts
