Skip to content
PolyLite PLA Temperature Color ChangingPolyLite PLA Temperature Color Changing

Polymaker PolyLite PLA Temperature Color Changing

35,00 

PolyLite PLA Temperature Color Changing contains certain additives that change color with changes in temperature. It appears green below 31°C and starts to turn green when the temperature rises above 31°C. At the same time, selection of purple which starts to turn white when it exceeds 31°C. It is safe to the touch and gives excellent final printing results, ideal for printing such as temperature indicators for electronics or toys and home decorations.

SKU: GETPLLTTEMP Categories: ,

PolyLite PLA Temperature Color Changing

PolyLite PLA Temperature Color Changing contains certain additives that change color with changes in temperature. It appears green below 31°C and starts to turn green when the temperature rises above 31°C. At the same time, selection of purple which starts to turn white when it exceeds 31°C. It is safe to the touch and gives excellent final printing results, ideal for printing such as temperature indicators for electronics or toys and home decorations.

PolyLite™ PLA is a high quality PLA designed for reliability and ease of printing.
This temperature change PLA changes color depending on the temperature.

Model Can holder mockup designed and printed by NordicSkol.

What is Jam-Free™ Technology?

Polymaker Jam-Free™ Technology increases the heat resistance of the filament itself (not the printed part) to 140˚C.
This prevents any jamming problem due to the hot end heat creep problem.
This prevents any jamming problem due to the hot end heat creep problem.
The increase of the filament heat resistance from 60˚C to 140˚C ensures a Jam-Free experience.

(Note the printed part will have the same heat resistance as regular PLA: ~60˚C)

For any information, don't hesitate to contact us

Weight 1 kg

Printing Properties

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 40mm/s – 60mm/s
Fan: ON

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

en_USEnglish