Skip to content
PPprint Cleaning-KitPPprint Cleaning-Kit

PPprint Cleaning-Kit

23,90 

The PPprint Cleaning Kit is ideal for cleaning and maintaining the ‘P-surface 141’. The PPprint Cleaning Kit contains the ‘P-wipe 515’ and the ‘P-cleaner 298’, which have a positive effect on the service life of the ‘P-surface 141’.

SKU: GETPPCLKIT Category:

Application: Thoroughly wash the ‘P-wipe 515’ with lukewarm water before first use. Shake ‘P-cleaner 298’ thoroughly before use. To clean the ‘P-surface 141’, apply a small amount of ‘P-cleaner 298’ on it and spread the ‘P-cleaner 298’ evenly with a paper towel. After a short soaking time of approx. 1 minute, the ‘P-cleaner 298’ can be completely removed with the paper towel. Finally, the ‘P-surface 141’ should be wiped with the handwashed and moistened ‘P-wipe 515’. After use, wash out the ‘P-wipe 515’ in clear water, wring out carefully and then pull into shape. Do not dry the ‘P-wipe 515’ in the sun or on radiators.

«P-wipe 515»:

Size: 30 x 40 cm
Material composition: 100% sheep leather
hand washable

«P-Cleaner 298»

Capacity: 250 ml
Biodegradable
Store in a cool and dry place

Security alert ‘P-cleaner 298‘:

DANGER: May be fatal if swallowed or if inhaled. Causes skin irritation. Causes severe eye irritation. Keep out of the reach of children. Wear protective gloves/eye protection IF INGESTIONS: Immediately call TOXIC INFORMATION CENTER/Medical Doctor/First Aid. IF ON SKIN TOUCH: Wash with plenty of soap/water. DO NOT induce vomiting. IF IN CONTACT WITH EYES: Rinse gently with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists, seek medical advice/attention. Dispose of the contents/container in accordance with local regulations. Contains: Hydrocarbons (C11-C14), n-alkanes, isoalkanes, cyclics, <2% aromatics, butyl glycol, amides, coco, N,N-bis(hydroxyethyl).

en_USEnglish