Skip to content
Polylite_Galaxy_ABS_Teal_resized-Polylite_Galaxy_ABS_Teal_resized-

Polymaker Polylite Galaxy ABS

35,90 

Polylite Galaxy ABS provides excellent print quality with minimal odor during printing. Combining impact resistance with heat resistance (~100˚C), PolyLite™ ABS is a good choice for mechanical parts, robotics, functional prototypes or home appliance replacements.

SKU: GETPLTPETG-1-1 Categories: ,

Polylite Galaxy ABS

Polylite Galaxy ABS provides excellent print quality with minimal odor during printing. Combining impact resistance with heat resistance (~100˚C), PolyLite™ ABS is a good choice for mechanical parts, robotics, functional prototypes or home appliance replacements.

Which 3D printer can print PolyLite™ ABS?
Depending on the size of the models you are trying to print, PolyLite™ ABS may require a closed chamber or even an actively heated chamber.

In general, an open 3D printer with a bed temperature of 90˚C and a print temperature of 260˚C can handle models smaller than the size of a fist. For larger prints you will need an enclosed 3D printer (~40-50˚C), for models larger than ~15-20cm in any direction, an actively heated chamber (~70˚C+) will be required.

Using the proper bed adhesion can also help print larger parts without warping issues.

Can PolyLite™ ABS be post-treated with acetone?
Yes, PolyLite™ ABS can be smoothed with acetone.
WARNING: Acetone is a dangerous chemical, handle it with the necessary safety precautions.

You can find TDS here

Weight 1 kg

Printing Properties

Printing Temperature: 245˚C – 265˚C
Bed Temperature: 90˚C – 100˚C
Printing Speed: 30mm/s – 50mm/s
Fan: OFF

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 70˚C for 6h
(Only if the material has absorbed moisture)

en_USEnglish